1. Feasibility study              

• Site appraisal, including geotechnical studies.
• Analysis of possible basic solution to client requirements.
• Considering different solutions to accessing potential sites.
• Assessment of any site information provided by the client.

       2. Architectural projection  

• Architectural project based on needs of the client.
• Selection of prefabricated element ( in base of the lights opens needed for the plan distribution and used high)
• Selection of the façade composition and materiality
• Plan, sections, façade of the building.
• Interior of the building – extra ( Client decision)

       3. Engineering projection    

• Structural analyzes of prefabricated elements.
• Projection of prefabricated elements by our team directed by eng. Vincenzo Silistrini.

       4. Production                        

• Production of elements according to the engineering project.
• Each elements is produced and cast in our factory.
• Elements are put in tracks, which is divided according to element dimensions.
• Inserts are put in each element following the structural drawing.
• When elements are ready ( the concrete mark) they lifted from the tracks.
• Each element is signed ( according to the project and element number) and then transported to the stock area.

       5. ​Transportation                 

• Elements are selected from the stock area, according to a studied before row ( the row of the assemblage on site)
• Finished elements are transported with trucks to their final location.

       6. ​Assemblage                     

• Elements are assembled in  place by our team of assemblers.
• Each element is connected to the others with inserts.

       7. ​Finishing works               

• Finishing works are the last passage before the delivery. They include the siliconization of panel joints, small repairments etc.

       ​8. Object delivery                 

• The precast building is ready to be used!